Case study: recording an electric guitar

4 06 2012

I recently went to Nashville for a high profile studio job. I already knew the studio because I had worked there countless times. Your typical big Nashville studio…
No need to familiarize with the gear they have. As a recording pro with years of experience under my belt I can tell you: I know my LA-2A, believe me.

I had the studio techs put the mics where I wanted them and ordered the guitarist to play some riffs so I could make my basic settings and simply get in the mood. It soon turned out that this guy was not exactly a session cat, I can tell you that much. His playing was sub par to say the least.
His clumsy and unoriginal riffing was of the sort that makes you want to become a guitar player yourself. Just because he makes it sound so easy. Because it is. At least the stuff he was playing.

To top that off, the guitarist did not care to have his guitar tuned when he showed up for the session. The reason he gave me: ‘my guitar tuner is broken.’ Now, back in the day this might have been a superb excuse, but nowadays, in the age of http://www.org.net this certainly does not cut it.

There is a website for everything. There is a website solely devoted to Eb tuning and how it affects the sound and the feel of the guitar. And finally there even is an ‘online tuner Eb (E flat)‘ giving reference note that you can tune up against.

As a musician, and even more as a recording engineer, you have to utilize the power of the internet. There are so many great sources of knowledge, like this very site, where you can learn in hours what would normally take a lifetime.

If all the knowledge I give away for free here, would have been given to me when I started out…boy, I don’t know where that would have led me! It is beyond all imagination.

So, the guitarist played his riffs and the first thing I did was to engage the high-pass-filter of the SSL console. This way less of the guitar signal is coming through, which is exactly what I wanted.
But this only affected the lower frequencies, of course. To target his signal from the high frequencies as well, I used a low-pass-filter in an old tube EQ they had lying around there. Now he was cut from both sides. No escape here.

I then engaged the Massenburg EQ and cut some 18dB at the 7kz range. This put a serious dent in his sound.

To get the sound I was going for I dialed in at 2kHz with a Q of .5 and lowered that by 9dB.

I then grabbed the fader and started to lower it until the guitar signal was barely discernible. I was looking for the point where you couldn’t tell the guitar is there, but when you mute the track, you can tell something is missing.

Needless to say the guitarist did not like the result, because he thought he should be clearly audible. As a pro recording engineer it is you has to make the decision. And you have to be ready for it. No messing around. If you have envisioned the sound, you have to go after it.

Advertisements




Finding the right plugin for the job (Part 2)

17 05 2012

Let’s say you have recorded the first track and you are pretty proud of yourself. You listen to your recording and the first impression is kind of OK.

Then you will start to listen to the recording again. And again. You will listen to it over and over and over, because, let’s not kid ourselves here, you’re not a pro. You’re a beginner. And that’s what beginners do. Your brain needs time to adapt and comprehend all the information given in this tutorial series.

After you have listened to your recording in Cubase for some time, you will notice a slight difference between you recording and your favorite commercial recordings. But..wait a minute. WAAAIT A MINUTE!!! What did I say here? Yes, you are correct, you should always compare your recordings to another recording which you choose as a reference. This reference recording should be made by a true recording pro. Do not try to get away with less. In order to drag yourself out of the mud, you have to mess with the best. Or you will die like the rest!

So now that you compare your recording to a pro recording you will probably find, that your recording is lacking a certain something. You might not yet have the words to describe what it is exactly that your track does not have, but you feel that there is something slightly off. A little itching in the back of your mind tells your, that there might be something missing here.

That something are effects!

Effects are necessary for a professional music production today. You will simply not find any commercial production these days that doesn’t use at least SOME effects. Even if you’re not able to hear them. Your ears are not yet accustomed to the subtle details, and don’t blame yourself. These skills take time to develop. So even if you think that a particular song does in fact have no effects on it whatsoever, you are probably wrong.

The different types are plentiful and complicated. It takes a lifetime to really see through the plugin forest and use them to fullest. As a recording pro with years of experience under my belt I use can say that I now have achieved this state. Actually I achieved it a couple of years ago.

But for an ordinary recording engineer to look at the vast amount of compressors, limiters, EQs, delays and all that, for such a person not to get confused takes some time and dedication.

Another thing is that nowadays people start out recording with digital tools. They never had the chance to learn the craft from the ground up. They never worked in a big major studio, where the huge stars would record their legendary albums. Here they would have learned how to use effects. Believe me that. Talking about school of hard knocks.

Finding the right tool for the job is paramount. But it is also hard. In the next section of this hands-on pro-tutorial I will share some secret tips and tricks about how to pick the right plugin. These surprisingly simple rules of thumb will make your life a whole easier. So stay tuned…





Finding the right plugin for the job (Part 1)

11 12 2011

For me, as a seasoned pro with years of experience under my belt, it is pretty easy to find the right plugin for the job. Most of the time I run on auto-pilot.
But for somebody like you, who has just started out, and maybe will never make it to the top, choosing the right plugin can be an overwhelming task.
It is important that you believe in yourself and give it an honest try. Don’t give up too easily. There are lots and lots of examples, where people with even less talent than you, have managed to find themselves a niche in the recording industry and have their little outcome. It’s not the best of lifes, but it is a life.

A case study

I was recording a hard rock band, and things went pretty smoothly, as is most often the case when you put a bunch of pros together. Real professional don’t mess around, they mean business. There is on room for people who want to have small talk for a couple of hours, then go off to have a coffee, and then come back at 9 o’clock in the evening to start working. That’s not how things work in the recording business.You have to be ready. You have to work hard and give your best. That’s what counts in the end, because that’s what brings the professional production to life.

So, I had already recorded the drums and the bass, but, although the tracks sounded good when played by themselves, I wasn’t quite satisfied with the way the sounded when played together. Something just didn’t seem quite right here, and knew immediately what it was. I had recorded the drums on several different tracks. I usually use one for kick drums, one or two for the snare, two for the toms and two for the overheads, also called cymbals. I had recorded the bass on one mono track by directly plugging it into my SSL console.
In order to keep the peaks under control, I used a little bit of compression from the built-in compressor. The SSL compressor sounds pretty nice. I only use a little, because it is easy to overdo. Compression, once applied, can not be taken away. You can not bring back something you have taken away before recording it. The recorded signal does not contain the information about the peak values anymore, and there is no way to bring them back. No matter how good the overall quality of the recording is, these are the universal rules or audio recording.

I had also applied a little bit of EQ. Not much, just a tad of highs added and some cutting below 33Hz in order to control the very low frequency range. That’s all I did. Now I had the tracks on my hard drive and loaded into Cubase. I had given the project a name and set up the input devices correctly. I was ready to go. The tracks did not blend together very well, and I knew that I had to do something about it, because if the tracks don’t fit together, it will be very hard to make a decent song. Everything should blend just fine, and appear to be part of the same song. That’s absolutely key for every single one of my productions.

Cubase Compressor[/caption]

I decided to use the Cubase compressor plugin. I selected the first tracks and fired it up. Bam! Instant gratification. I knew from experience what the right settings would be. There is always room to experiment, but it is good to have a rough idea of what the settings could be, to have a starting point. Otherwise you could try endlessly to get the track to sound better without any success. You would be completely lost. Maybe as a beginner you would even come to the conclusion, that a compressor is in fact not the right tool for the job, and start to look for alternatives. That would be a huge mistake, and it is of vital importance to void it. A beginner has to learn how to use a compressor, as it one of the most important tools in every mixing engineers arsenal. This includes being able to dial in sensible settings right away, and then go on from there.

I will continue this case study in part 2 of this tutorial.





Using plugins (Part 2)

10 12 2011
Waves SSL EQ Plugin

Waves SSL EQ Plugin

One great things about Cubase is, that it comes with so many plugins right out of the box.  Whether you need an equalizer or a compressor or a limiter, Cubase will have something for you on board! The quality of those plugins is really good as well.
There are, however, a lot of third-party plugins as well, and it can be hard for a newbie to tell the difference between the individual offers.
One special advantage of the Cubase plugins as opposed to third-party plugins is, that they are integrated more seamlessly. This is because almost all of Cubases own plugins already use the VST 3 standard, while most third-party plugins use an older version of the VST standard.

Many plugins try to emulate a hardware device that really exists. They even make the User Interface so that it looks like the actual hardware device. It’s like the original device somehow got digitalized and jumped right into the computer. A fascinating experience for a seasoned pro with many years of experience under his belt, who works with the actual hardware devices on a daily basis. Suddenly you are no longer limited by the number of vintage compressors you can afford. All you have to do is buy the plugin once, and then use it as often as you see fit on any track. Using an LA-2 compressor on every track would not have been possible in the good old days. Nobody had this much money, not even a super-pro like me. Nowadays you can not only use one on every track, but you can actually chain them together and create intricate effects, that only a true recording master can even appreciate.

URS Compressor Plugins

URS Compressor Plugins

Emulating original studio hardware is the big thing for plugin manufacturers and customers alike. The advantages are clear: by emulating a Neve preamp, for example, a plugin manufacturer doesn’t have to come up with his own sounds. He can simply take the sound of the Neve preamp and copy it. That’s a huge advantage. Developing a sound, making it heard, getting it into the heads of people around the world can be a challenging task. How much easier is it to simply take a sound that is well-known, and heard on thousands upon thousands of famous and not-so-famous recordings, and just build your little app around it. Most software developers are not particularly bright, so this approach plays right into their hands. They love it!

There are times however, where using a vintage plugin is not the right thing to do. Sometimes what you want is a clean equalizer, that doesn’t add color or texture to the sound, but simply does it’s job controlling the frequencies. Without much character or vintage mojo. When you want transparency instead of coloration, you turn to the standard plugins that are delivered with Cubase. Equalizers and compressors, as well as delay, chorus and a lot of other effects are right there to be used in any way you like.

As a pro, I can tell you that I use these on a regular basis even on some demanding and pretty high-profile commercial productions. It does not always have to be a Waves vintage mojo effect. In fact, it is better to learn your craft using the ordinary plugins first. Once you get a hang of how to use the standard Cubase compressor, you can then turn to more sophisticated variants of the same theme. Beginners always seem to think, the latest mojo plugin is what will make their projects sound professional. But they are mistaken. A true pro will make a pro recording with a minimal selection of standard plugins, because he knows how to use them to the fullest. He has a true understanding of when and how to employ a specific effect, and it is exactly this knowledge, that seperates the newbies from the seasoned pros, with years of experience under their respective belts.